NEW 2013 Mini Hidden Digital Video Recorder and Camera with Remote Control
It has small contour design, which does UV spray finishing for the whole body. It is very fashionable and wearable and matches with all kinds of portable tools.
Support PC camera and chatting function
Support AVI video format.
It can carry out high definition image recording under low illumination.
Support 30 fps for 640*480
Support USB1.1 and USB2.0.
Support 16GB T-flash card.(maximum)
Build-in lithium battery which can make a video more than 180 minute(one equal capacity battery free)
Support PC camera and chatting function
Support AVI video format.
It can carry out high definition image recording under low illumination.
Support 30 fps for 640*480
Support USB1.1 and USB2.0.
Support 16GB T-flash card.(maximum)
Build-in lithium battery which can make a video more than 180 minute(one equal capacity battery free)
LED status
1. The red light turns on when boot initialization complete
2. State of charge, the red light flashes slowly ,when charging is completed, red light is on
3. The battery is low, the red light flash 5 times ,then the automatic shutdown
4. Memory is full or no card, shut down automatically 5 seconds later
5. Connected to the computer to read and write data, the red light flashes slowly
1. The red light turns on when boot initialization complete
2. State of charge, the red light flashes slowly ,when charging is completed, red light is on
3. The battery is low, the red light flash 5 times ,then the automatic shutdown
4. Memory is full or no card, shut down automatically 5 seconds later
5. Connected to the computer to read and write data, the red light flashes slowly
Operating
1. Boot: switch to ON, press on/off button on the remote control, the red light flashes 3 times then turns on ,enter standby mode.
2. Motion detection: In standby mode, press the sensor video button on remote control, the red light flashes 4 times quickly then turns off, into motion detecting camera standby. Flashing red light when moving objects comes , then into the motion detection, press the sensor video button once to stop the motion detection ,recording is automatically saved and into standby.
3. Recording: in standby mode (red light), press the record button of the remote control, the red light flashes rapidly twice off after recording, press the record button, and save the recording, the red light recovery and enter standby
4. Camera: In the standby mode (red light), press the remote control video button, the red light flashes three times quickly off after to begin recording. press video camera to stop recording and save the red light recovery and enters the standby state
5. Photo: In standby mode (red light), press the remote control camera button, the red light flashes , take a picture
6. Shutdown: In standby mode (red light), press the on/off key on the remote control, the red light flashes three times, shut down. (Switch to off, cut off all power)
7. connected to the computer: switch to ON, the USB connection on the computer, and then press the remote control to open the key to enter the U disk mode
8. Charging: USB charge connected to a computer or USB connection charg
9. Modified: Insert the TF card and turn on, there is a file named TIME.TXT in the card, connect with computer, input the synchronization time according to the format
(T&C: As this is manufacturer sepcifications, seller will not responsible if any different from the specification stated here
(
